Unexpected Behaviour - Miele KM 6520 FR Operating And Installation Instructions

Unexpected behaviour

Problem
The heating element for
one of the cooking
zones switches on and
off.
A cooking zone
switches off automatic-
ally.
One or more residual
heat indicators are
flashing.
Cause and remedy
This "timing" of the element is normal. It is caused
by the electronic temperature control (see "How the
cooking zones work").
If the heating switches on and off at the highest
power level, the overheating protection has been
triggered (see "Overheating protection).
It has been operated for too long.
 You can use the cooking zone again by switching
it back on (see "Safety switch-off").
There was an interruption to the power supply during
operation or when residual heat was present.
Problem solving guide
49