Table of Contents
Advertisement
Available languages
Available languages
9.1 Error codes
❖ Error codes are indicated by the corresponding LED combinations of the
LEDs 1,2, 3,and 4 (s. fig. and table below).
E
RROR CODE
(LED
COMBINATION
LED 4
flickers slightly
LED 4 and LED 3
flicker slightly
LED 2
flickers slightly
LED 1, LED 2 and
LED 4 flicker slightly
If overflow occurs, turn off the main water supply before calling a service.
If there is water in the base pan because of an overfill or small leak, remove
the water before restarting the dishwasher.
M
EANING
)
Long water inlet
time.
Required
temperature is not
reached.
Overflow / leakage
Communication
error between main
board and display
board.
~
136
P
OSSIBLE CAUSES
➢ Tap is closed.
➢ Water intake is restricted.
➢ Water pressure is too low.
➢ Malfunction of the heating
element
➢ Please contact the aftersales
service.
➢ An element of the appliance
leaks.
➢ Please contact the aftersales
service.
➢ Short circuit / cable breakage.
➢ Please contact the aftersales
service.
~
Advertisement
Table of Contents
