Pkm GSP12-6E Instruction Manual page 130

D
L
OWER SPRAY ARM
3. Clean the spray arm with warm soapy water and the nozzles with a soft brush
(E / s. fig. below).
4. Rinse the spray arms thoroughly using flowing water (s. fig. below).
E
S
OFT BRUSH
5. Proceed in reverse order to install the spray arms properly.
6. Ensure that the spray arms can rotate freely.
NOTICE! Any damage caused to your appliance by improper removal or
installation of the spray arms will not be fixed free of charge, even if the
guarantee period of the appliance is still valid.
8.3 Cleaning of the appliance and the control panel
❖ Clean the exterior of the appliance with a suitable polish.
~ ~
130