3scort TD-150 User Manual page 30

Let's imagine that you need to do a tank calibration with portions equal to 10
liters. You create an Excel table. Use the .csv format. The first line of the table must
read the following:
If you cannot empty the tank completely, you need to somehow find out how
many liters or gallons are already there in the tank. After that you can add the
second line manually.
Let's imagine that in this case there are always 10 liters inside the tank that
cannot be removed from there so when you put the sensor in the tank, it instantly
shows the level 115 instead of 1.
Fig. 35 Fuel level 1, Volume 0 (liters/gallons)
Fig. 36 Ten liters already in the tank. Level 115.
30