3scort TD-150 User Manual page 17

Select the COM port with the right number in the configurator.
Fig. 18 Opening the COM port
Connect the sensor to a USB-RS485 converter via the 6 pin MOLEX connector
(Fig. 19) or via the clamps and wires (if the extension cable is already connected to
the sensor). The orange wire is the line A of the RS485 output of the sensor, the
white wire is the line B of the RS485 output, the black wire is the GND and the red
wire is the PWR (Fig. 20).
Fig. 19 Sensor connected via MOLEX
17