Table of Contents
Advertisement
11
Cleaning
Optical lenses
Fan grids
Clean the optical lenses, that are accessible from the outside, regularly in order to
optimize the light output. The frequency of cleaning depends on the operating envi‐
ronment: wet, smoky or particularly dirty surroundings can cause more accumulation
of dirt on the optics of the device.
Clean with a soft cloth using our lamp and lens cleaner (item no. 280122).
n
Always dry the parts carefully.
n
The fan grids of the device must be cleaned of any contamination, such as dust, etc.
on a regular basis. Before cleaning, switch off the device and disconnect mains-oper‐
ated devices from the mains. Only use pH-neutral, solvent-free and non-abrasive
cleaning agents. Clean the unit with a slightly damp lint-free cloth.
FS-x350 LED Follow Spot, FS-x150 LED Follow Spot
Follow Spot
Cleaning
23
Advertisement
Table of Contents
