Stairville FS-350 Series User Manual page 15

Backlight of the display
Behaviour on DMX signal failure
Fade time setting
4.
Press [UP] or [DOWN] to select the desired value and confirm the selection with
[ENTER].
Submenu Value
'Power On 'Total'
Time'
'Resetable'
'Led On Time' 'Total'
'Resetable'
1. Press [MENU] to activate the main menu.
2. Press [UP] or [DOWN] until the display shows 'Display Backlight' and confirm
the selection with [ENTER].
3.
Press [UP] or [DOWN] until the display shows 'On' and confirm the selection
with [ENTER].
ð The backlight of the display is activated.
4. Press [UP] or [DOWN] until the display shows 'Off' and confirm the selection
with [ENTER].
ð The backlight of the display goes out after one minute.
1. Press [MENU] to activate the main menu.
2. Press [UP] or [DOWN] until the display shows 'DMX Fail' and confirm the selec‐
tion with [ENTER].
3. Press [UP] or [DOWN] to select the desired submenu and confirm the selection
with [ENTER].
Submenu
'Hold'
'Blackout'
'Emergency Light'
The set fade time affects the push button [LED OFF/ON].
1.
Press [MENU] to activate the main menu.
2. Press [UP] or [DOWN] until the display shows 'Fade Time' and confirm the selec‐
tion with [ENTER].
3.
Press [UP] or [DOWN] to select the desired value between '0.5 s' and '30 s' and
confirm the selection with [ENTER].
Function
Shows the total number of hours that the
device was connected to the power
supply.
Shows the hours that the device has been
connected to the power supply since the
last reset.
Displays the total number of hours the
LED has been on.
Shows the hours that the LED has been
on since the last reset.
Function
If the DMX control fails, the last setting is retained.
If the DMX control fails, the device is blacked out.
If the DMX control fails, an emergency Light kicks
in.
FS-x350 LED Follow Spot, FS-x150 LED Follow Spot
Follow Spot
Operating
15