Bumper Replacement Instructions
Preliminary Requirements
Required Tools and Components
Tools
Anti-static wrist strap (1 MOhm resistance)
•
Soft ESD safe mat
•
Microfiber / lint free cloth
•
Plastic pry tool (spudger)
•
Plastic tweezers
•
Components
Bumper (Refer to
•
Prerequisite Steps
Power Off Device
Ensure device is powered off and disconnected from its power source.
Disconnect the device charger or power cord from mains power.
•
Let the device sit until the Xbox button in the center of the controller is no longer
•
illuminated or by holding the Xbox button and selecting "Turn off controller".
Remove the batteries from the compartment.
•
Remove Top Case
Remove the top case as detailed in the Procedure – Removal (Top Case) for the appropriate
device.
(page 14)
Illustrated Service Parts
List)
24