Download Print this page

Microsoft XBOX CONTROLLER Repair Instructions page 26

Hide thumbs Also See for XBOX CONTROLLER:

Procedure – Removal (Bumper)

1. Remove Top Cap

Using a plastic pry tool, pry the top cap tabs up and off the locking posts on the mid-

frame. Then slowly twist the cap off the top of the mid-frame.

2. Unhook Bumper Clips

Using the pointed end of a plastic pry tool, unhook the edge clips on the right and left of

the bumper.

NOTE:

The clips on the bumper are fragile. Be careful not to push too hard/far or

you could snap the clips.

Table of Contents

Need help?

Do you have a question about the XBOX CONTROLLER and is the answer not in the manual?