Microsoft XBOX CONTROLLER Repair Instructions page 46

Preliminary Requirements
Required Tools and Components
Tools
T5 (Torx) driver
•
Anti-static wrist strap (1 MOhm resistance)
•
Soft ESD safe mat
•
Microfiber / lint free cloth
•
Components
I/O Board (Refer to Illustrated Service Parts List)
•
I/O Board Screw (PN) Qty. 4
•
Prerequisite Steps
Power Off Device
Ensure device is powered off and disconnected from its power source.
Disconnect the device charger or power cord from mains power.
•
Let the device sit until the Xbox button in the center of the controller is no longer
•
illuminated or by holding the Xbox button and selecting "Turn off controller".
Remove the batteries from the compartment.
•
Remove Top Case
Remove the top case as detailed in the Procedure – Removal (Top Case).
Remove D-Pad
Remove the D-Pad as detailed in the Procedure – Removal (Mainboard)
Remove Mainboard
Remove the mainboard as detailed in the Procedure – Removal (Mainboard)
Procedure – Removal (I/O Board)
(page 14)
(page 21)
(page 31)
45