Table of Contents
Advertisement
www.ti.com
2.2.2
Register Control
•
Send All: Sends the register configuration to all devices
•
Save Regs: Saves the register configuration for all devices
•
Load Regs: Load a register file for all devices.
– Select Load Regs button
– Double click on the data folder
– Double click on the desired register file
– Click Send All, ensuring all of the values are loaded properly
2.2.3
Miscellaneous Settings
•
Reset USB: Toggle this button if the USB port is not responding. This generates a new USB handle
address
Note: Reset the board after every power cycle and click the Reset USB button on the GUI
•
Exit: Stops the program
SLAU455 – August 2012
Submit Documentation Feedback
Figure 7. ADS58H40 SNRBoost/Burst Mode Panel
Copyright © 2012, Texas Instruments Incorporated
Software Control
9
ADS58H40 EVM
Advertisement
Table of Contents
