Texas Instruments ADS5294EVM User Manual
  1. Manuals
  2. Brands
  3. Texas Instruments Manuals
  4. Motherboard
  5. ADS5294EVM
  6. User manual
Texas Instruments ADS5294EVM User Manual

Texas Instruments ADS5294EVM User Manual

8-channel, analog-to-digital converter evaluation module
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ADS5294, 8-Channel, Analog-to-Digital Converter
This user's guide gives a general overview of the evaluation module (EVM) and provides a general
description of the features and functions to be considered while using this module. This manual is
applicable to the ADS5294 analog-to-digital converters (ADC), which collectively are referred to as
ADS529x. Use this document in combination with the respective ADC data sheet. The ADS529xEVM
provides a platform for evaluating the ADC under various signal, clock, reference, and power supply
conditions.
1
2
3
3.1
3.2
...................................................................................................................
4
5
6
7
8
8.1
8.2
9
9.1
9.2
9.3
9.4
10
11
12
1
2
3
4
5
6
7
8
9
10
11
12
Windows, Microsoft are trademarks of Microsoft Corporation.
SLAU355 - July 2011
Submit Documentation Feedback
...........................................................................................
.......................................................................................................
......................................................................................
.....................................................................................
.................................................................................
........................................................................................................
......................................................................................................
....................................................................................................
............................................................................................................
............................................................................................
........................................................................................
.......................................................................................................
.........................................................................................................
............................................................................................
.......................................................................................
..........................................................................................................
..........................................................................................
...........................................................................
List of Figures
............................................................................................................
.......................................................................................
.......................................................................................................
......................................................................................................
....................................................................................................
...........................................................................................
....................................................................................................
...................................................................................
......................................................................................
..........................................................................................
ADS5294, 8-Channel, Analog-to-Digital Converter Evaluation Module
Copyright © 2011, Texas Instruments Incorporated
Evaluation Module
Contents
........................................................................
..........................................
......................................................................
User's Guide
SLAU355 - July 2011
3
4
4
5
5
6
7
8
11
12
12
15
17
17
19
21
22
23
31
33
3
4
7
8
9
11
12
13
14
16
17
19
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ADS5294EVM and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Texas Instruments ADS5294EVM

Summary of Contents for Texas Instruments ADS5294EVM

  • Page 1: Table Of Contents

    ................ADS5294EVM Printed-Circuit Board Layout List of Figures ......................Evaluation Setup ..................ADS5294EVM Basic Configuration .......... HW Setup With Connection Between TSW1250EVM and ADS5294EVM ....................... Power-Up Indications ...................... ADS5294 GUI Launch ....................TSW1250 GUI Launch ................... ADS5294 Time Domain Setup ....................
  • Page 2 Schematic, Sheet 7 of 9 ....................Schematic, Sheet 8 of 9 ....................Schematic, Sheet 9 of 9 ............ADS5294EVM Top Layer Assembly Drawing – Top View ........... ADS5294EVM Bottom Layer Assembly Drawing – Bottom View ................ ADS5294EVM Top Layer Copper – Top View ..............

  • Page 3: Quick View Of Evaluation Setup

    (optional) paths to attenuate the harmonics and noise from the generators. Power Supply: A single +5-V supply powers the ADS5294EVM. The supplies for the ADS5294 device are derived from the +5-V supply. The power supply must be able to source up to 1.5 A. A +6-V supply can power the TSW1250EVM using a wall adapter.

  • Page 4: Default Configuration

    JP13 JP19 TP_VP Figure 2. ADS5294EVM Basic Configuration 1. The ADS5294EVM basic configuration uses the onboard single-ended clock as the default option. See Section 9.2 for the ADC clock, various-mode jumper settings. 2. P1: +5-V Power supplies the connector. 3. JP4, JP5, and JP6 are set to enable +3.3V Analog, +1.8VD Digital, and +1.8VA Analog to device, respectively.

  • Page 5: Gui Installation - Mandatory

    Select Search for the best driver in these locations, and enter the file path for (C:\Program Files\Texas Instruments\ADS 5294EVM\CDM 2.04.06 WHQL Certified) in the combo-box. or browse to it by SLAU355 – July 2011 ADS5294, 8-Channel, Analog-to-Digital Converter Evaluation Module Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated...

  • Page 6: Test Setup

    • Connect +5-V supply at P1 connector or across TP_VP (+5V) and TP2 (GND). • Connect USB cable from PC to USB1 on ADS5294EVM. • Connect ADS5294EVM to TSW1250EVM using P10 connector. • Connect USB cable from PC to USB port J8 of TSW1250EVM.

  • Page 7: Power Up Ads5294

    Figure 3. HW Setup With Connection Between TSW1250EVM and ADS5294EVM Power Up ADS5294 After connecting the ADS5294EVM to the TSW1250 using the P10 connector, +6-V adapter to TSW1250EVM, and +5 V (from the external power supply) to P1 connector, then power up is complete.

  • Page 8: Launch Ads5294 Gui

    (approximately 450 mA to 150 mA) of the external +5-V power supply. For the rest of the test, PD must be unchecked. Click on Soft Reset button to reset device internally. SLAU355 – July 2011 ADS5294, 8-Channel, Analog-to-Digital Converter Evaluation Module Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated...

  • Page 9: Ads5294 Gui Launch

    Launch ADS5294 GUI www.ti.com Figure 5. ADS5294 GUI Launch SLAU355 – July 2011 ADS5294, 8-Channel, Analog-to-Digital Converter Evaluation Module Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated...
  • Page 10 ADC output interface in 2-WIRE LVDS mode. Also click button ADC Bit Resolution to set ADC in 14 Bits mode. Ensure that the MSB_LSB button status shows LSB_First. SLAU355 – July 2011 ADS5294, 8-Channel, Analog-to-Digital Converter Evaluation Module Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated...

  • Page 11: Launch Tsw1250 Gui

    Launch TSW1250 GUI Launch TSW1250 GUI. The Message window displays this message to indicate that the setup of the TSW1250EVM and ADS5294EVM is working properly. If a different message or an error message appears, contact TI FAE. 1. Select ADS5294_2W, 14bits, from the GUI.

  • Page 12: Test Ads5294

    Select Time Domain page from TSW1250 GUI. • Uncheck Overlay unwrap waveform. Time Domain Overlay Unwrap waveform Figure 7. ADS5294 Time Domain Setup SLAU355 – July 2011 ADS5294, 8-Channel, Analog-to-Digital Converter Evaluation Module Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated...

  • Page 13: Ads5294 Test Pattern

    TI FAE (Field Application Engineer) to troubleshoot the problem. • On the ADS5294 GUI, change Test Pattern to None from RAMP PATTERN for next step. SLAU355 – July 2011 ADS5294, 8-Channel, Analog-to-Digital Converter Evaluation Module Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated...

  • Page 14: User Interface: Time Domain Format

    TEST ADS5294 www.ti.com Figure 9. User Interface: Time Domain Format SLAU355 – July 2011 ADS5294, 8-Channel, Analog-to-Digital Converter Evaluation Module Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated...

  • Page 15: Step 2: Single Tone Fft

    • Select Single Tone FFT page at TSW1250 GUI. • Connect Channel 1 of ADS5294EVM to a signal generator through a BP filter. If no BP filter is presented, the result is not good. • Set Amplitude of the signal generator to 10dBm •...

  • Page 16: User Interface: Single Fft Format

    TEST ADS5294 www.ti.com Single Tone FFT Hanning Figure 10. User Interface: Single FFT Format SLAU355 – July 2011 ADS5294, 8-Channel, Analog-to-Digital Converter Evaluation Module Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated...

  • Page 17: Board Configuration

    1.8 V TP1, TP2, TP3, Ground test points. TP4, TP5, TP14, TP21, TP23, TP25, TP34, USB1 USB interface connector SLAU355 – July 2011 ADS5294, 8-Channel, Analog-to-Digital Converter Evaluation Module Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated...
  • Page 18 It is an alternative input for channel 8. Need to install two resistors (R169 and Default) R170) and remove two resistors(R171 and R172) from J6.It uses TI THS4509 single-ended to differential amplifier. SLAU355 – July 2011 ADS5294, 8-Channel, Analog-to-Digital Converter Evaluation Module Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated...

  • Page 19: Adc Clock

    Board Configuration www.ti.com ADC Clock Five options are available for the source of the ADC clocks. Refer to Table 3 for details. In Figure ADS5294EVM uses an onboard, single-ended clock as the default option. JP16 JP18 JP15 JP17 JP20 JP13 JP19 Figure 12.
  • Page 20 CMOS generator output at SMA connector J8. This configures the external CMOS source as clock input to buffer. Dia.1 Dia.2 Dia.3 Dia.4 Dia.5 SLAU355 – July 2011 ADS5294, 8-Channel, Analog-to-Digital Converter Evaluation Module Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated...

  • Page 21: Light-Emitting Diodes

    Board Configuration www.ti.com Light-Emitting Diodes LED33VA LED18VA LED18VD LED_+5V Figure 13. ADS5294EVM LED Location Table 4. LED Indicators Reference Designator Power Supply Color LED_+5V +5 V Green LED1.8VA +1.8 VA Green LED1.8VD +1.8 VD Green LED3.3VA +3.3 VA Orange SLAU355 – July 2011...

  • Page 22: Miscellaneous Test Points

    Miscellaneous Test Points TP_D1 JP12 JP14 TP_D0 TP_D2 TP_D7 TP22 Figure 14. ADS5294EVM Test Point Locations Table 5. Miscellaneous Test Points Reference Designator Description TP22 VCM: Common-mode output pin, 0.95-V output CDC_VTH: Fixed voltage level (1.65 V) TP_D0 SCLK: Serial clock input...

  • Page 23: Evm Schematics

    EVM Schematics www.ti.com EVM Schematics Figure 15. Schematic, Sheet 1 of 9 SLAU355 – July 2011 ADS5294, 8-Channel, Analog-to-Digital Converter Evaluation Module Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated...
  • Page 24 EVM Schematics www.ti.com Figure 16. Schematic, Sheet 2 of 9 Figure 17. Schematic, Sheet 3 of 9 SLAU355 – July 2011 ADS5294, 8-Channel, Analog-to-Digital Converter Evaluation Module Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated...
  • Page 25 EVM Schematics www.ti.com Figure 18. Schematic, Sheet 4 of 9 SLAU355 – July 2011 ADS5294, 8-Channel, Analog-to-Digital Converter Evaluation Module Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated...
  • Page 26 EVM Schematics www.ti.com Figure 19. Schematic, Sheet 5 of 9 SLAU355 – July 2011 ADS5294, 8-Channel, Analog-to-Digital Converter Evaluation Module Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated...
  • Page 27 EVM Schematics www.ti.com Figure 20. Schematic, Sheet 6 of 9 SLAU355 – July 2011 ADS5294, 8-Channel, Analog-to-Digital Converter Evaluation Module Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated...
  • Page 28 EVM Schematics www.ti.com Figure 21. Schematic, Sheet 7 of 9 SLAU355 – July 2011 ADS5294, 8-Channel, Analog-to-Digital Converter Evaluation Module Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated...
  • Page 29 EVM Schematics www.ti.com Figure 22. Schematic, Sheet 8 of 9 SLAU355 – July 2011 ADS5294, 8-Channel, Analog-to-Digital Converter Evaluation Module Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated...
  • Page 30 EVM Schematics www.ti.com Figure 23. Schematic, Sheet 9 of 9 SLAU355 – July 2011 ADS5294, 8-Channel, Analog-to-Digital Converter Evaluation Module Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated...

  • Page 31: Ads5294Evm Bill Of Materials

    CAPACITOR, SMT, 0603, CERAMIC, 10µF, 10 µF Taiyo Yuden C33, C51, C54 6.3V, 20%, X5R JUMPER-0603(UN) UNINSTALLED JUMPER, SMT0603 TP8–TP11, TP15–TP20 SLAU355 – July 2011 ADS5294, 8-Channel, Analog-to-Digital Converter Evaluation Module Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated...
  • Page 32 STANDOFF Keystone STANDOFF HEX M3 THR ALUM 18MM 29311 SCREW STEEL M3 THR 6MM SCREW Keystone SCREW STEEL M3 THR 6MM SLAU355 – July 2011 ADS5294, 8-Channel, Analog-to-Digital Converter Evaluation Module Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated...

  • Page 33: Ads5294Evm Printed-Circuit Board Layout

    JP19 EDGE NUMBER: 6527886 XTAL LED_+5V TP_VP S/N: -2.5V +2.5V JP21 Figure 24. ADS5294EVM Top Layer Assembly Drawing – Top View SLAU355 – July 2011 ADS5294, 8-Channel, Analog-to-Digital Converter Evaluation Module Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated...
  • Page 34 JP18 JP16 JP10 R173 JP11 JP15 JP17 JP20 JP13 JP19 JP21 Figure 25. ADS5294EVM Bottom Layer Assembly Drawing – Bottom View SLAU355 – July 2011 ADS5294, 8-Channel, Analog-to-Digital Converter Evaluation Module Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated...
  • Page 35 ADS5294EVM Printed-Circuit Board Layout www.ti.com Figure 26. ADS5294EVM Top Layer Copper – Top View SLAU355 – July 2011 ADS5294, 8-Channel, Analog-to-Digital Converter Evaluation Module Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated...
  • Page 36 ADS5294EVM Printed-Circuit Board Layout www.ti.com Figure 27. ADS5294EVM Internal Layer 1, Ground – Top View SLAU355 – July 2011 ADS5294, 8-Channel, Analog-to-Digital Converter Evaluation Module Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated...
  • Page 37 ADS5294EVM Printed-Circuit Board Layout www.ti.com Figure 28. ADS5294EVM Internal Layer 2, Power – Top View SLAU355 – July 2011 ADS5294, 8-Channel, Analog-to-Digital Converter Evaluation Module Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated...
  • Page 38 ADS5294EVM Printed-Circuit Board Layout www.ti.com Figure 29. ADS5294EVM Internal Layer 3, Power – Top View SLAU355 – July 2011 ADS5294, 8-Channel, Analog-to-Digital Converter Evaluation Module Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated...
  • Page 39 ADS5294EVM Printed-Circuit Board Layout www.ti.com Figure 30. ADS5294EVM Internal Layer 4, Ground – Top View SLAU355 – July 2011 ADS5294, 8-Channel, Analog-to-Digital Converter Evaluation Module Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated...
  • Page 40 ADS5294EVM Printed-Circuit Board Layout www.ti.com Figure 31. ADS5294EVM Bottom Layer Copper – Top View SLAU355 – July 2011 ADS5294, 8-Channel, Analog-to-Digital Converter Evaluation Module Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated...
  • Page 41 Evaluation Board/Kit Important Notice Texas Instruments (TI) provides the enclosed product(s) under the following conditions: This evaluation board/kit is intended for use for ENGINEERING DEVELOPMENT, DEMONSTRATION, OR EVALUATION PURPOSES ONLY and is not considered by TI to be a finished end-product fit for general consumer use. Persons handling the product(s) must have electronics training and observe good engineering practice standards.
  • Page 42 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.

Table of Contents