Disassembly; Front Panel; Base Unit (Bu-5Bd25) - Sony CDP-XE530 Service Manual

Hide thumbs Also See for CDP-XE530:

Table of Contents

Note : Follow the disassembly procedure in the numerical order given.

• In order to remove the front panel block when the power supply

does not turn on, rotate the cam with tapering driver as the figure

shows, and the loading part will be moved.

Then pull out the loading part by your hand to remove the loading

panel as the figure shows. After that take out the front panel block.

Tapering driver

Loading part

1 Turn the cam to the direction of

arrow (counter clock wise) by

tapering driver.

2 Take off the disc table.

SECTION 3

DISASSEMBLY

3 Yoke bracket

BU-5BD25

— 7 —

Loading panel

4 Remove the Base unit

(BU-5BD25) to the direction

of arrow.

Table of Contents