Ukca Declaration Of Conformity - Aerotech BLM Series Hardware Manual

BLM

UKCA Declaration of Conformity

Manufacturer
Address
Declares that the product:
Product
Model/Types
To which this declaration relates, meets the essential health and safety requirements and is in
conformity with the relevant UK Legislation listed below:
Using the relevant section of the following UK Designated Standards and other normative
documents when installed in accordance with the installation instructions supplied by the
manufacturer.
Authorized
Representative:
Engineer Verifying
Compliance:
Date
8
Aerotech, Inc.
101 Zeta Drive
Pittsburgh, PA 15238-2811
USA
BLMSC, BLMUC, BLMC, BLM, BLMH, BLMX Motors (excluding VAC6 versions)
All
Electrical Equipment (Safety) Regulations 2016
Hazardous Substances in Electrical and Electronic Equipment Regulations 2012
IEC 60034-1:2010
IEC 61010-1:2010
NOTE:
Managing Director
Aerotech Ltd
The Old Brick Kiln, Ramsdell, Tadley
Hampshire RG26 5PR
UK
Aerotech, Inc.
101 Zeta Drive
Pittsburgh, PA 15238-2811
9/12/2023
Rotating electrical machines
Safety requirements for electrical equipment for
measurement, control, and laboratory use
Safe operation of the motor requires over speed
and over current protection. This could be done by
the connected controller / amplifier combination.
/ Simon Smith
/ Matt Maurer
Hardware Manual
www.aerotech.com