Hardware Manual
2.4. Mechanical Arrangement of the Magnet Track
You can mount the magnet track with the opening up, down, left, or right based on the machine
design.
Figure 2-2:
Linear Motor Mounting Configurations (end view)
2.5. Track Stacking
Connect the magnet tracks end-to-end to increase the linear motor travel distance. Align the labels
as shown.
IMPORTANT: Use a reference edge or alignment fixture and mounting hole pattern
(refer to
between adjacent tracks will not adversely effect forcer performance.
Figure 2-3:
Stacking Tracks
www.aerotech.com
Section 1.2.
Dimensions) to align the tracks. A small gap (up to 0.5 mm [.020"])
BLM
45