Table of Contents
Advertisement
Hardware Manual
Handling and Storage
IMPORTANT: It is the responsibility of the customer to safely and carefully lift and
move the motor.
Be careful when you move or transport the motor.
l
Retain the shipping materials for future use.
l
Transport or store the motor in its protective packaging.
l
WARNING: Electrostatic Discharge (ESD) Sensitive Components!
Wear an ESD wrist strap when you handle, install, or do service to the system assembly.
You could damage the power supply or drives if you fail to observe the correct
ESD practices.
Inspect the shipping container for any evidence of shipping damage. If any damage exists, notify the
shipping carrier immediately.
Remove the packing list from the shipping container. Make sure that all the items specified on the
packing list are contained within the package.
The documentation for the motor is on the included installation device. The documents include
manuals, interconnection drawings, and other system documentation. Save this information for
future reference.
Each motor has a label listing the system part number and serial number. These numbers contain
information necessary for maintenance or system hardware and software updates. Locate this label
and record the information for later reference.
Unpacking and Handling
It is the responsibility of the customer to safely and carefully lift and move the motor.
IMPORTANT: All electronic equipment and instrumentation is wrapped in antistatic
material and packaged with desiccant. Ensure that the antistatic material is not
damaged during unpacking.
DANGER: Lifting Hazard! Use care when you move the motor or you could negatively
affect the performance of it.
Use the correct lifting techniques, mechanical assistance, or additional help to lift or
l
move this product.
Do not use the cables or the connectors to lift or move this product.
l
Make sure that all moving parts are secure before you move the motor. Unsecured
l
moving parts could shift and cause injury or damage to the equipment.
If the motor is heavy, a single person lift could cause injury. Use assistance when you
l
lift or move it.
o
o
Carefully remove the motor from its protective shipping container.
Lift this product only by the base.
l
Use a cart, dolly, or similar device to move the motor to a new location.
l
Gently set the motor on a smooth, flat, and clean surface. Use compressed nitrogen or clean, dry, oil-
free air to remove any dust or debris that has collected during shipping.
www.aerotech.com
Refer to
Section 1.2. Dimensions
Refer to
Section 1.1. Motor Specifications
for dimensions
for weight specifications.
BLM
15
Advertisement
Table of Contents
