Electrical Warnings - Aerotech BLM Series Hardware Manual

Hardware Manual

Electrical Warnings

To decrease the risk of electrical shock, injury, death, and damage to the equipment, obey the
precautions that follow.
DANGER: Electrical Shock Hazard!
Motor phase voltage levels could be hazardous live.
l
Personnel are protected from hazardous voltages unless electrical interconnections,
l
protective bonding (safety ground), or motor enclosures are compromised.
Do not connect or disconnect motor interconnections while connected to a live
l
electrical power source.
Before you set up or do maintenance, disconnect electrical power.
l
Make sure that the motor frame is safety grounded with a conductor equal in size to
l
the phase conductors.
The drive must contain a properly-sized fuse, matched to the motor cable wire size.
l
It is the responsibility of the End User/System Integrator to make sure that motors
l
are properly connected and grounded per Engineering Standards and applicable
safety requirements.
It is the responsibility of the End User/System Integrator to configure the system
l
drive or controller within the Aerotech motor electrical and mechanical
specifications.
www.aerotech.com
BLM
11