Abilica Stream FC V Manual page 32

INFORMATION
LABEL
RPM
SPEED
TIME
DISTANCE
CALORIES
PULSE
QUICK START
The easiest way to get started with your exercise, is simply to press the START/STOP
button. The computer will then start the registration of training data, and you can adjust the
tension up and down by pressing the UP and DOWN buttons. The program profile will skip
one column forward for every 100 meters travelled.
Press the START/STOP-button again to stop the recording of training information.
HOW TO ACTIVATE THE DIFFERENT FUNCTIONS
Manual
Use the mode button to select training in manual mode.
Preset
If desired, the computer is preset to:
• Counting down from a given time .
• Counting down from a given distance .
• Counting down from a given calorie consumption .
• Give an audible signal (alarm) when the pulse exceeds the given limit.
To pre-set computer, press the MODE button to select the function you want to
preset. When the desired function is flashing, change the value up and down by
pressing the UP and DOWN buttons.
Press MODE again to move on to the next function.
When one or more values are entered, you can at any time, press START / STOP to
start training.
If you have chosen to preset one or more values, these will count down to 0. Note
that the computer will stop recording as soon as one of the values reach 0.
DESCRIPTION
Shows the pedaling frequency
Shows the current speed
Shows the elapsed time
Shows the distance travelled
Shows a calculated of calories burned
Shows the current heart rate
32