Controls; Unit Controller - Trane SCWM Series Installation, Operation And Maintenance Manual

Controls

Unit Controller

The MSC uses the UC600 control platform for monitoring
and control. XM expansion modules are used to expand
the UC600's I/O capabilities.
In the control panel, the following modules are used:
• UC600
• TD-7 touch screen display and user interface
• XM70.1
• XM32.2
• XM32.3
• XM32.12
• XM32.4 (70-80 ton units only)
• XM30.5 (70-80 ton units only)
• XM30.6 (70-80 ton units only)
• XM32.13-GBAS option
• XM30.14-GBAS option
• XM30.15-GBAS option
54
Note: The number after the dot in the name (example:
XM30.#) is the IMC bus address, which is set using
the rotary switches on the module.
Remotely mounted in the compressor cassettes, the
following modules are used:
• XM30.7-Entering/Leaving Condenser water
temperature sensors, condenser water strainer in/out
water pressure sensors
• XM30.8-Compressor A: discharge/suction pressure
sensors, suction temperature, and WRV position
control
• XM30.9-Compressor B: discharge/suction pressure
sensors, suction temperature, and WRV position
control
• XM30.10-Compressor C: discharge/suction pressure
sensors, suction temperature, and WRV position
control
• XM30.11-Compressor D: discharge/suction pressure
sensors, suction temperature, and WRV position
control
PKG-SVX027D-EN