Waring MX Series Manual page 3

6. Allow motor to come to a complete stop before removing container from
blender base. Never place the container on the motor base or remove it
from the motor base while motor is running.
7. Always hold container with one hand when starting and while blending.
Never operate without jar lid.
8. Wash and dry container after each use. See Cleaning and Sanitizing
Instructions.
9. To turn unit off, press STANDBY
MX ELECTRONIC TOUCHPAD SWITCHES WITH TIMER
1. Before starting, make sure that the blender is
unplugged and container is not positioned on
the blender.
2. Put ingredients into container and cover it. Do not
fill above MAX line.
3. Place container on blender base. Be sure container
is fully seated and that drive coupling is properly
engaged. Plug blender cord into outlet.
4. This blender is equipped with an electronic membrane keypad. The
keypad has a main power STANDBY
and PULSE buttons and a 30-second countdown timer with up
and down arrows to set time.
5. Press the STANDBY button to turn on the blender. Green LED will
illuminate. The electronic timer will indicate 10 seconds (default). Press
the up or down arrow to set the desired time. The electronic
timer will indicate run time in 5-second intervals up to a maximum of 30
seconds. After the desired time is set, press HI
blender. The timer will count down to 0 in 1-second intervals and blend-
er will shut off. Pressing the PULSE
the STANDBY button will override the timer and the blender will stop
regardless of time left on timer.
NOTE: If you want to increase or decrease time while timer is counting
down, press up or down
5-second intervals.
6. If the blender is not used for five seconds, the timer function will turn
off and return to manual mode. To reactivate timer, press up
arrows. When using the electronic timer again, the initial time will
be the last time set. Note: If unit has been turned off or unplugged, the
timer will default back to 10 seconds.
7. For continuous operation, press either LO or HI
finished blending, press STOP
the PULSE button. Motor will run on HI
released.
NOTE: Your MX Electronic Blender uses a Slow Start
pressing HI , the unit will start in the LO
then switch to HI speed. This allows for a more even blending of
ingredients in container.
button. Green LED light will go off.
button, plus HI , LO , STOP
or LO to start the
button, the STOP button or
arrows. Time will increase or decrease in
button. When
. For momentary operation, press
speed until the button is
feature. When
™
speed for 2 seconds and
4
8. Allow motor to come to a complete stop before removing container from
blender base. Never place the container on the motor base or remove it
from the motor base while motor is running.
9. Wash and dry container after each use. See Cleaning and Sanitizing
Instructions.
10. To turn the unit off, press STANDBY
go off.
Warning – This is a Class A product. In a domestic environment this
product may cause radio interference, in which case the user may be
required to take adequate measures.
1. Before starting, make sure that the blender is
unplugged and container is not positioned on
the blender.
2. Put ingredients into container and cover it.
Do not fill above MAX line.
3. With the unit in STANDBY I position, place
container on blender base. Be sure
container is fully seated and that drive
coupling is properly engaged. Plug blender
cord into outlet.
4. This blender has variable speed controls. Set blender to desired speed
between 1 and 10.
5. The left paddle switch defaults to the VARIABLE setting in order to use
the speed adjustment option. Press right paddle switch up to the ON
position.
6. When finished blending, set paddle switch to STANDBY position.
7. This blender is equipped with a PULSE option. Hold left paddle switch
in down position to engage PULSE function. Unit will run on max speed
(30,000 RPM) until the paddle switch is released.
8. Allow motor to come to a complete stop before removing container
from blender base. Never place the container on the motor base or
remove it from the motor base while motor is running.
9. Always hold container with one hand when starting and while blending.
Never operate without jar lid.
10. Wash and dry container after each use. See Cleaning and Sanitizing
or down
Instructions.
1. Before starting, make sure that the blender is unplugged and container
is not positioned on the blender.
2. Put ingredients into container and cover it. Do not fill above MAX line.
3. Place container on blender base. Be sure container is fully seated and
that drive coupling is properly engaged. Plug blender cord into outlet.
button. Green LED light will
MX VARIABLE SPEED OPERATION
MX REPROGRAMMABLE CONTROL SETTINGS
5