Related Manuals for Waring Ellipse MXE2000
Summary of Contents for Waring Ellipse MXE2000
- Page 1 BLENDING SYSTEM MXE2000 For your safety and continued enjoyment of this product, always read the instruction book carefully before using.
-
Page 2: Important Safeguards
IMPORTANT SAFEGUARDS 19. The appliance must be positioned so that the plug is accessible. 20. DO NOT use carbonated liquids in the blender jar or any blending When using electrical appliances, basic safety precautions should always be container. Using carbonated liquids in the blender jar or any blending taken, including the following: container may result in injury. - Page 3 PARTS IN THE BOX Sound Enclosure Base Docking Station Sound Enclosure Drive Drive Single Charging Dasher Station Lid/Dasher System Some tools and parts may not be included. You can buy additional tools and parts at waringcommercialproducts.com. Coupling Blending Triple Charger Assembly Kit (Sold Separately) Jar Pad...
- Page 4 GETTING STARTED/CHARGING YOUR ELLIPSE DRIVE NOTE: Use a soft, damp cloth to clean the clear window of the Ellipse drive. This will ensure the drive runs properly. CAUTION: Store the Ellipse chargers and Ellipse drive at room temperature NOTE: Do not overcharge the Ellipse drive. Ellipse drive should not only.
- Page 5 BEFORE BLENDING 3. The blender allows you to set the pulse to your desired speed. While blending at Normal Pulse speed, the motor can be adjusted. To do this, 1. Before starting, make sure that the blender is unplugged and container hold the Normal Pulse button and press Speed Up or Speed Down...
- Page 6 5. Use Speed Up or Speed Down button to set the time value (up to If Total Count needs to be reset, call your nearest Waring authorized service 90 seconds). Once 90 seconds is reached, pressing Speed Up will not facility for information.
- Page 7 IMPORTANT — HOT BLENDING INSTRUCTIONS TURNING OFF YOUR BLENDER NOTE: Not intended for use with the Ellipse blending system. Whether your blender is in STANDBY mode, NEW PROGRAM mode, or the motor is running, pressing the ON/OFF button will stop the unit To minimize the possibility of being scalded when blending hot materials, from running and will turn the power off.
- Page 8 ELLIPSE JAR IMPORTANT 1. Wash, rinse, sanitize, and dry container prior to initial use and whenever NOTE: IN ORDER TO MINIMIZE POSSIBILITY OF SCALDING, TEMPERATURE OF it will not be used again within a period of 1 hour. WASHING SOLUTION AND RINSE WATER MUST NOT EXCEED 115˚F (46˚C), AND 2.
- Page 9 ELLIPSE BLENDER ACCESSORIES GUIDE ELLIPSE BLENDER ACCESSORIES GUIDE MODEL DESCRIPTION MODEL DESCRIPTION Retainer Ring Wrench for CAC93X Ellipse Jar Pad CAC197 & CAC95 (to remove blending CAC119 assembly from container) *Recommended Maintenance: To ensure proper performance, replace every 3 to 6 months. Jar Pad &...
-
Page 10: Disposal/Recycling Of Batteries
Under this warranty, Waring, during the warranty period, will repair or replace ___________________________________ any part which, upon our examination, is defective in materials or workmanship, provided the product is delivered prepaid to the Waring Service Center at: 314 ___________________________________ Ella T. Grasso Ave. Torrington, CT 06790, or any Factory Approved Service Center. - Page 11 ©2023 Waring Commercial 314 Ella T. Grasso Ave. Torrington, CT 06790 1-800-4-WARING www.waringcommercialproducts.com MXE2000 Series IB 035708 23WC082906 RV02 - 2104...