IMPORTANT UNPACKING INSTRUCTIONS 1. Place the box containing your Waring Pro blender on a flat sturdy surface ® before unpacking. 2. Open corrugated flaps. 3. Remove instruction book and any printed materials from top of box. 4. Pull up corrugation and remove. Remove jar and padding.
Page 3
13. When blending hot liquids, remove center piece of two-piece lid. See Hot Blending instructions. 14. The use of ear protection is recommended during extended operating periods. 15. See Cleaning and Sanitizing instructions for all Waring Pro Blenders. ® NOT FOR WATERJET CLEANING.
GROUNDING INSTRUCTIONS • For your protection, this appliance is equipped with a 3-conductor cord set. • 120 Volt units are supplied with a molded 3-prong grounding-type plug (NEMA 5-15P) and should be used in combination with a properly connected grounding type outlet as shown in Figure A. If a grounding type outlet is not available, an adapter, shown in Figure B, may be utilized to enable a 2-slot wall outlet to be used with a 3-prong plug (except in Canada and Europe).
7. Allow motor to come to a complete stop before removing container from blender base. Never place the container on the motor base or remove it from the motor base while motor is running. 8. Always hold container with one hand when starting and while blending. Never operate without jar lid.
Page 6
• In repetitive batch-processing applications, frequent cleaning of the container will prolong the life of the blade assembly. In no case should actual running time between cleanings exceed 1/2 hour. • Do not use container to store processed foods or beverages. To wash and rinse container: REMOVE CONTAINER FROM MOTOR BASE.