Suggestions for Rack Installation
Suggestions for Rack Installation
1. Ensure that power is switched off before installation and before any wiring is connected to the equipment.
2. Site the equipment in well ventilated places and avoid places of high humidity.
3. Whenever possible, fit Inter-M MIC model CM-916. If a Phantom powered MIC is to be used, we recommend
that it operates on +5V DC.
4. Please observe wiring polarity when connecting DC power to the equipment.
5. Before connecting to the RM-6016 line out terminals, check and match the incoming wiring for HOT, COLD
& GND potential.
REMOTE AMPLIFIER with ZONE SELECTOR
RM-6016
7