Preparing For Installation; Safety Precautions; Installation Environment Requirements; Temperature/Humidity - Ruijie Reyee RG-RAP1201 Hardware Installation And Reference Manual

Hardware Installation and Reference Guide
2

Preparing for Installation

2.1

Safety Precautions

Note
To avoid personal injury and device damage, carefully read the safety precautions

before you install the device.
The following safety precautions may not cover all possible dangers.

The RG-RAP1201 wall plate wireless access point plays a vital role in connecting
networks, and its proper functioning is crucial for ensuring the normal operation of all
interconnected sub-networks.
The following safety precautions must be followed during installation and use.
Do not place the device in a damp or wet place, and keep the device away from any

kind of liquid.
Install the device in a position far away from any heat sources.

Wear an ESD wrist strap during installation and maintenance.

Do not wear loose clothing and tighten your belt, scarf, and sleeves to prevent them

from getting caught on the device.
Keep tools and accessories away from walking areas.

Use an uninterruptible power source (UPS) to avoid power failures and disturbance.

2.2

Installation Environment Requirements

The RG-RAP1201 wall plate wireless access point must be installed indoors to ensure its
normal operation and prolonged service life. The installation site must meet the
following requirements.
2.2.1

Temperature/Humidity

You are advised to maintain an appropriate temperature and humidity at the installation
site to ensure normal operation and prolonged service life of the device. High humidity
can lead to poor insulation and electrical performance issues such as leakage. On the
7
Preparing for Installation