Getting Started; Parts List; Preparation - THORLABS APD440A Operation Manual

APD440x

2 Getting Started

2.1 Parts List

Inspect the shipping container for damage. Please do not cut through the cardboard. You might
need the box for storage or for returns.
If the shipping container seems to be damaged, keep it until you have inspected the contents
and you have inspected the APD440x mechanically and electrically.
Verify that you have received the following items within the package:
1. APD440x Temperature-Compensated Variable Gain Avalanche Photodetector
2. Plastic Cover Cap (SM1EC2B) on a Coupler
Ring (SM1RR SM1 Retaining Ring)
3. LDS12B Power Supply (±12V, 250 mA), 100 VAC, 120 VAC or 230 VAC line voltage
4. Quick Reference

2.2 Preparation

Carefully unpack the unit and accessories. If any damage is noticed, do not use the unit.
Contact Thorlabs
20
Prior to operation, please check if the indicated line voltage range on the power supply
matches with your local mains voltage! Adjust the power supply accordingly to 100 VAC,
120 VAC or 230 VAC.
Attention
Wrong settings for the mains voltage may damage the power supply.
Note
If you prefer to use your own power supply, please ask
connector cable.
2
and have us replace the defective unit.
(SM1T1 SM1 Coupler)
Thorlabs for an appropriate power
20
with a Retaining
© 2020 Thorlabs