Sony INZONE Buds Help Manual page 64

Wireless noise canceling gaming headset

Table of Contents

Noise canceling function: OFF/Ambient Sound Mode: OFF

You will hear a notification sound from both headset units (or from the left headset unit when only the left headset

unit is worn) at the same time.

About the instruction manual video

Watch the video for how to use the noise canceling function.

https://rd1.sony.net/help/mdr/mov0063/h_zz/

Hint

You can also turn the noise canceling function on/off, and change the settings of the noise canceling function and Ambient Sound

Mode with "INZONE Hub".

You can select one of the following on "INZONE Hub" to set how you want the functions to change when you tap the left headset

unit.

Noise canceling function: ON

Ambient Sound Mode: ON

Noise canceling function: ON

When only one headset unit is worn, the Ambient Sound Mode is set to ON, even if the headset was set to the noise canceling

function when you used the headset last. Putting on both headset units will turn on the noise canceling function.

Note

The headset cannot fully perform the noise canceling function unless the supplied earbud tips are used.

If the headset is not being worn properly in your ears, the noise canceling function may not work correctly. Twist the headset to

put it into your ears properly.

Do not cover the microphone part on the left or right headset unit with your hand, etc. The effect of the noise canceling function or

Ambient Sound Mode may not work properly or a beeping sound (feedback) may occur. If any of this is the case, remove your

hand, etc. from the left or right microphone part.

Yy2977