Default Settings - Sony INZONE Buds Help Manual

Help Guide
Wireless Noise Canceling Gaming Headset
INZONE Buds
About the touch sensor
Tap the touch sensor for various operations, such as music playback, phone calls, or changing the setting of the noise
canceling function.
You can change the functions assigned to the touch sensors on the left and right headset units using "INZONE Hub".
Some assigned functions may not be available depending on the connection method or connecting device.
A: Touch sensors (left, right)
To operate the touch sensor, tap the center of the touch sensor with the pad of your index finger.

Default settings

To switch the noise canceling function and
Tap
Ambient Sound Mode
When connected to a Bluetooth device: To
Tap twice receive a call/end a call/cancel an outgoing call
When connected to the USB transceiver: —
Tap 3 times —
When connected to a Bluetooth device: To
Hold your finger to reject a call/switch the microphones on or off
the touch sensor When connected to the USB transceiver: Turn
the microphones on/off
Left
"INZONE Hub" settings: [Ambient Sound
Control + Mic]
"INZONE Hub" settings: [Volume Control]
To increase the volume
When connected to a Bluetooth device: To
receive a call/end a call/cancel an outgoing
call
When connected to the USB transceiver: —
—
When connected to a Bluetooth device: To
reject a call/lower the volume
When connected to the USB transceiver: To
lower the volume
22
Right