LG STB-3500 Setup Manual page 79

(Continued from previous page)
• If the STB is not in Pass-through Mode, press MENU on the Installer Remote to display the Function
Menu, use the Up/Down arrows to select/highlight the Input menu icon, and then press OK. Then, use
the Up/Down arrows to select the Screen Share option from the Input Menu.
Note: If Screen Share is currently not available/grayed out, you may need to turn OFF another Media
Share feature in order to use Screen Share. For example, access the General Menu and make sure that
SoftAP is turned OFF. See also note on page 77 regarding simultaneous use of Media Share features.
Note: Depending on the remote control being used (in any mode), you may also access the Smart
Launcher via the SMART button.
2. Follow the on-screen instructions to initiate the Miracast / WiDi connection from your Miracast / WiDi
device. Note that you may be prompted to enter a PIN number that appears on the display panel screen
into your Miracast / WiDi connection window to complete the connection.
Once the connection is established, the STB display may be used as a second screen for the Miracast /
WiDi device.
Bluetooth Sound Sync
The following steps describe how to access and use the Bluetooth Sound Sync feature.
1. Turn ON the STB/display panel, and then use one of the following methods to access the Bluetooth
Sound Sync application:
• If the STB is in Pass-through Mode (i.e., the Pro:Centric application is not loaded), press the
PORTAL button on the Installer Remote, and use the Left/Right arrow keys to select Bluetooth
Sound Sync from the STB's Smart Launcher.
• If the STB is not in Pass-through Mode, you will need a remote that has a SMART button in order to
access this feature from the STB's Smart Launcher.
2. Follow the on-screen instructions to initiate and confirm pairing between your device and the STB.
Once Bluetooth pairing is successful, audio from the device may be heard through the display panel's
speakers. (Make sure the STB volume is at the appropriate level.)
SoftAP
The following steps describe how to access and use the SoftAP feature.
1. Turn ON the STB/display panel, and press MENU on the Installer Remote to display the STB
menus (either the setup menus or the Function Menu depending on whether the STB is or is not in
Pass-through Mode).
2. Use the Up/Down arrow keys to select/highlight the General menu icon, and then press OK.
3. In the General Menu, use the Up/Down arrow keys to select SoftAP, and then press OK.
Note: If SoftAP is currently grayed out, you may need to turn OFF another Media Share feature in
order to use SoftAP. For example, make sure that Wi-Fi Direct is turned OFF. See also note on page
77 regarding simultaneous use of Media Share features. Also, make sure a wired LAN connection has
been established.
206-4276
Reference: Using Media Share Features (Cont.)
(Continued on next page)
79