Custom Master Stb Setup; Before You Begin; Clonable Stb Setup Menu Features - LG STB-3500 Setup Manual

Custom Master STB Setup

This section describes how to create a customized Master STB Setup for cloning purposes when
the STB is in Pass-through Mode. The Master STB Setup can used to configure either STBs that
are to remain in Pass-through Mode or STBs that are to be configured for FTG Mode via CPU.
Cloning requirements and procedures are described in detail on pages 45 to 50.
Note: You can use the FTG File Manager to create an FTG Configuration (.tlx) file for FTG
Mode via CPU configuration, if desired (see pages 51 to 52). However, it is not possible to
customize STB setup menu settings in the FTG File Manager. If you wish to include customized
STB setup menu settings in the STB configuration, in addition to the channel lineup and Installer
Menu settings, perform the Master STB Setup procedure to create the configuration file.

Before You Begin

• It is recommended that you disconnect all STB Aux inputs if you intend to run Auto Tuning
(Channel Search). Under certain conditions, Auto Tuning is disabled if there is an Aux input
active.
• All Learning and Teaching processes on the STB are performed via USB memory device / TLX
file. The TLX file comprises Installer Menu settings, IP Environment Menu settings (with the
exception of unique STB attributes and settings), and all STB sources' (analog, digital, AV1,
HDMI, etc.) clonable setup menu settings. See also "Clonable STB Setup Menu Features" list
below.
• If the TLX file contains an FTG Channel Map (created during Master STB Setup or in the FTG
File Manager), the Target STB(s) will be configured for FTG Mode via CPU after Teaching is
performed, though as part of the Teaching process, you may have the option to select either
logical or physical channel tuning. If you would like the Target STB(s) to remain in Pass-through
Mode, the TLX file should not include an FTG Channel Map.

Clonable STB Setup Menu Features

Quick Settings
Channels
Note: Some menu options vary between analog and digital channels and Aux inputs.
42
General
Language
Time & Date
−
Clock Mode (Auto/Manual)
−
Time Zone
No Signal Power Off
Accessibility
Pointer Options
Closed Captions
206-4276