LG STB-3500 Setup Manual page 29

(Continued from previous page)
Note: If there are no files of a particular file type on the USB device, that file type field will not
be displayed in the Ez Download screen. For example, if there are no PTC files on the USB
device, you will not see a "PTC Software" field in the Ez Download screen.
Note: Press on the Installer Remote or select BACK, as necessary, to return to the
STB Manager / USB Download Menu. To exit the STB Manager, select CANCEL (if accessed
from the STB menus, you may also press EXIT on the Installer Remote to exit). If you accessed
the STB Manager via the EZ-Manager Wizard, you will be returned to the last screen on display
before you selected the "USB Configuration" option. If you accessed the STB Manager via the
STB menus, you will be returned to program viewing.
7. If more than one USB memory device is currently connected to the STB, be sure to select the
USB device that contains the file(s) you wish to use. If necessary, use the Up/Down arrow
keys on the Installer Remote to select/highlight the Select USB Memory Device field and
press OK. Then, use the arrow keys to select the appropriate USB device from the drop-down
list.
8. To select a file use the Up/Down arrows on the Installer Remote to select/highlight the
appropriate file type/pull-down field, and then press OK to view a drop-down list of available
files. From the drop-down list, use the Up/Down arrow keys to select the desired file.
Note: The utility will only allow you to select one of each file type for downloading. For example,
if there are two files in the Ez Download Teach To STB (TLX) list, you can only select one or the
other of those two files.
Note: The initial default value for each file type is "None." After the Ez Download utility is run,
a file is automatically created and stored on the USB device that was used. The file, which
will have a ".dzm" file extension, maintains a history of the file(s) previously used with the Ez
Download utility. The next time(s) you use this USB device with the Ez Download utility, the
file(s) selected for the last download will be pre-selected for the current download.
Note: If an STB Software (CPU) file is selected, STB SW Version and Update Version fields will
be displayed at the bottom right of the screen. Ensure the software version of the selected file is
the correct version before applying the update to this STB.
9. If a TLX file that includes an FTG Channel Map is selected, a Channel Tuning / Channel Banner
Display field will be displayed at the right of the screen. If the FTG Channel Map comprises RF
channels and Aux inputs only (the latter designated by 130-0 through 137-0), you can choose
the format for the channel tuning/banner display. Use the arrow keys on the Installer Remote to
select Logical tuning or Physical tuning. A checkmark will appear at the left of the selected
option. Logical tuning is selected by default.
Note: If an FTG Channel Map includes IP channels, only logical tuning is available. Also, if the
selected TLX file does not include an FTG Channel Map, the message, "No Channel Map in
TLX file," will be displayed at the right of the screen.
10. When you are ready to continue, use the arrow keys on the Installer Remote to select UPDATE,
and then press OK.
206-4276
Ez Download Utility (Cont.)
(Continued on next page)
29