LG STB-3500 Setup Manual page 63

Media Share Setup
The Media Share Menu allows you to enable the following Media Share
features on this STB:
®
• LG Smart Share : Allows guests to use the STB/display panel to
access and view data shared either by wired DLNA Certified
connected to the same LAN as the STB or by wireless LG devices
using LG's Smart Share application with Wi-Fi Direct
• Screen Share: Enables screen sharing with a Miracast
Display (WiDi) capable device (e.g., a laptop with Intel
• DMR: Enables the STB to act as a Digital Media Renderer (DMR)
device to receive content from DLNA Certified devices on the same
network.
• Bluetooth Sound Sync: Allows guests to listen to audio from a
Bluetooth-enabled mobile device through the display panel's speakers.
• SoftAP: Enables the STB to function as a 2.4 GHz wireless access
point for up to five devices. Note that a wired network connection
MUST be established in order for guests to use SoftAP.
Note: See also Reference section, "Using Media Share Features," for
additional information.
1. With the Network Menu on display, use the arrow keys on the Installer Remote to select
Media Share. Then, press OK.
2. In the Media Share screen, each feature may be toggled from DISABLE to ENABLE
and vice versa as follows: Use the Up/Down arrow keys on the Installer Remote to select/
highlight the desired feature, and then press OK.
Note: If you enable Bluetooth Sound Sync, a pop-up confirmation banner will be displayed
since enabling Bluetooth Sound Sync renders Wireless LG Sound Sync unavailable. Select
Confirm to continue.
3. If you intend to enable SoftAP, make sure to complete the SoftAP access configuration as
follows:
• To enable use of a randomly generated security key for SoftAP access, set the Use
Default field to "ENABLE" (the Security Key field will subsequently be grayed out and
the random security key will be displayed).
• To specify your own security key for SoftAP access, set the Use Default field to
"DISABLE." Then, select the Security Key field and press OK. In the data entry field,
you can use the number keys on the Installer Remote to direct enter a numeric security
key, or you can use the arrow keys to select the appropriate alphanumeric characters—
at least eight, but no more than 64—from the pop-up virtual keyboard displayed at the
bottom of the screen. Note that the security key may not contain any special characters
(:, /, \, @, etc.). When you are done, select Enter from the virtual keyboard, and then
press OK on the Installer Remote.
206-4276
IP Environment Setup (Cont.)
®
devices
®
.
®
or Wireless
®
hardware).
MEDIA SHARE
Pro:Centric
Network
Smart Share
Screen Share
Pre-loaded Apps DMR
Bluetooth Sound Sync
TV Name
^
401KKTF1J505
SoftAP
Use Default
Security Key
^
00000000
Note: Bluetooth Sound Sync is only
available with CPU v3.00.18 or later.
(Continued on next page)
ENABLE
DISABLE
DISABLE
DISABLE
DISABLE
DISABLE
63