LG STB-3500 Setup Manual page 49

(Continued from previous page)
4. Insert the USB memory device with the TLX file into either of the USB ports on the Target STB.
5. Press MENU on the Installer Remote to display the STB setup menus (STB is in Pass-through
Mode) or the Function Menu (STB is already in FTG Mode).
6. Use the arrow navigation keys to select/highlight either the General menu icon from the STB
setup menus or the Safety menu icon from the Function Menu. Then, press the number "7" key a
total of seven times to display the STB Manager / USB Download Menu.
Note: The STB Manager / Diagnostics Menu is for service use only.
7. With the STB Manager / USB Download Menu on display, use the Up/Down arrow keys to select
Teach To STB (TLX), and then press OK.
STB MANAGER
USB Download Menu
Diagnostics Menu
8. In the Teach To STB (TLX) screen:
• If more than one USB memory device is currently connected to the STB, be sure to select the
USB device that contains the TLX file you wish to use. If necessary, use the Up/Down arrow
keys on the Installer Remote to select/highlight the Select USB Memory Device field and press
OK. Then, use the arrow keys to select the appropriate USB device from the drop-down list.
• Use the arrow keys on the Installer Remote to select/highlight the TLX file you want to
install, and then press OK. A checkmark will appear at the left of the selected file.
Note: Filenames of TLX files that were Learned from an STB are comprised of the STB
model and a five-digit number, for example, STB-3500-UA00001.TLX.
• If the TLX file includes an FTG Channel Map with RF channels and Aux inputs only, you can
choose the format for the channel tuning/banner display. Use the arrows keys to select the
desired Channel Tuning / Channel Banner Display option—either Logical or Physical—at the
right side of the Teach To STB (TLX) screen. A checkmark will appear at the left of the selected
option. Logical tuning is selected by default.
Note: If an FTG Channel Map includes IP channels, only logical tuning is available. Also, if a
TLX file does not include an FTG Channel Map, the message, "No Channel Map in TLX file,"
will be displayed at the right of the screen.
206-4276
Ez Download
Update STB Software
Update PTC Software
Teach To STB (TLX)
Cloning Procedures (Cont.)
CANCEL
(Continued on next page)
49