Table of Contents
Advertisement
Before You Begin
This section contains information you need before developing high-performance embedded
applications using the NI-7931R, NI-7932R, and NI-7935R devices.
Development Requirements
Successful system design with the NI-793xR devices may require knowledge in the following
areas, depending on your application.
•
Real-time programming
•
VHDL code design
•
LabVIEW and LabVIEW FPGA programming
If you are unfamiliar with any of these concepts, refer to the following table for a list of resources
for learning the fundamentals required for NI-793xR development.
Concept
Real-time programming
VHDL code design
LabVIEW and LabVIEW FPGA
programming
Table 1-1. Fundamentals Resources
Resources
Real-time programming courses are
available at
ni.com/training
also refer to the LabVIEW Real-Time
Module Help at
ni.com/manuals
Some VHDL training or experience is
required before implementing custom
protocols with the high-speed serial
transceivers. Do not attempt to develop
Component-Level IP (CLIP) without
VHDL knowledge. Refer to the FlexRIO
Help for more information about CLIP.
LabVIEW and LabVIEW FPGA training
are available at
ni.com/training
can also refer to the NI LabVIEW
High-Performance FPGA Developer's
Guide, available at
ni.com/tutorials
© National Instruments | 1-1
1
. You can
.
. You
.
Advertisement
Table of Contents
