Verifying The System Requirements; What You Need To Get Started - National Instruments 7932 Manual

USB device ports or host ports must be no longer than 30 m (100 ft). The
lengths of Ethernet cables and optical SFP+ cables are not limited.
Caution
configuration, application deployment, debug, and maintenance.

Verifying the System Requirements

To use the NI-7932R, your system must meet certain requirements. For more
information about minimum system requirements, recommended system, and
supported application development environments (ADEs), refer to the readme,
which is available on the software media or online at ni.com/updates.

What You Need to Get Started

The NI-7932R shipping kit, which includes the following components:
■
The NI-7932R device
■
FlexRIO Support DVD
■
Note
NI-7932R.
NI-7932R Getting Started Guide (this document)
■
Power screw terminal connector plug
■
A to Mini-B device port USB cable
■
A host computer running Windows, with NI software installed in the
■
following order:
Note
determine which software versions you need to use the NI-7932R
and supported FlexRIO adapter modules.
LabVIEW
■
6
ni.com
The USB device port is intended only for use in device
FlexRIO Support 15.1 is the earliest supported driver for the
Visit ni.com/info and enter the Info Code rdsoftwareversion to
NI-7932