Disabling Dnd; Ending Calls; Redialing A Call Automatically - Yealink CP965 User Manual

Yealink CP965 User Guide
When DND is enabled, the phone prompts "DND mode is enabled" and the DND icon
bar.
Incoming calls will be rejected automatically and "n New Missed Call(s)" ("n" indicates the number of missed calls.
For example, 1 New Missed Call(s)) will appear on the phone screen.
Note
: When DND and busy forward are enabled, all incoming calls will be forwarded to the configured destination number.
For more information on busy forward, refer to

Disabling DND

You can deactivate DND when you are ready to resume receiving calls again.
Procedure
1. Do one of the following:
Select Exit DND mode. from the idle screen.
l
Swipe down from the top of the screen to enter the control center and toggle DND off.
l
Go to More > Settings > Features > DND, turn off DND Status and then select
l

Ending Calls

You can end the current call at any time.
Procedure
1. Select
.

Redialing a Call Automatically

You can set the phone to redial a phone number automatically when you call a contact and the contact's line is
unavailable.
Procedure
1. Go to More > Settings > Features > Auto Redial.
2. Turn on Auto Redial.
3. Enter the desired time (between 1 and 300 seconds) in the Redial Interval field.
4. Enter the desired times (between 1 and 300) in the Redial Times field.
5. Select
.
When you dial a number but fail to establish a call, the phone prompts the failure reason and then prompts whether
to auto redial the contact, select OK to activate auto redial.
Forwarding All Incoming Calls to a Contact
30
appears in the status
.
.