Configuring The Flash Time; Basic Call Features; Conference - Yealink CP965 User Manual

Yealink CP965 User Guide
1. Go to More > Settings > Basic > Country.
2. Select the desired country.
3. Select .

Configuring the Flash Time

You can configure the flash time to adjust the length of time before a hook flash times out (or the call disconnects).
Flash time can be configured from the following options:
Auto: It depends on the country that is selected for the phone. The flash time is automatically set for that country.
l
75msec, 100msec, 300msec or 600msec: The hook flash times out after the designated time (in milliseconds).
l
Before You Begin
The required flash time may be different in different countries or for different gateways/PBX servers. Contact your
system administrator to find out which flash time you need to configure.
Procedure
1. Go to More > Settings > Advanced (default password: admin) > Flash Time.
2. Select the desired value.
3. Select
.
Related Topic
Selecting the Country for PSTN Use

Basic Call Features

The phone using PSTN account can also perform some basic call features, such as placing, answering and ending
calls.
The phone supports the following basic call features when using the PSTN account:
Placing Calls
l
Answering Calls
l
Ending Calls
l
Auto Answer
l
Auto Redial
l
ReCall
l
Call Mute
l
Call Hold/Resume
l
Related Topics
Placing Calls
Answering Calls
Ending Calls
Answering a Call Automatically
Redialing a Call Automatically
Placing a Call Back to the Last Incoming Number
Call Muting and Unmuting
Holding and Resuming Calls

Conference

As one PSTN account can only support one call, you need to activate a hook flash to set up a conference.
107