The Status Banner; Service Lockout Indication; Self Check Indication; Communication Loss - Nuvation Energy NUVG5 Product Manual

Nuvation Energy G5 High-Voltage BMS - NUVG5 Product Manual

5.3.4. The Status Banner

The banner at the top of the screen is used to indicate high level changes in system status. During
typical operation nothing is displayed and this indicates the Operator Interface is communicating with
the BMS and the BMS is fully operational with no major diagnostics problems.

5.3.4.1. Service Lockout Indication

When the system is either entering or is in service lockout, a banner is displayed indicating this to the
user.
Figure 44. Operator Interface Service Lockout indicator
Figure 45. Operator Interface Entering Service Lockout indicator

5.3.4.2. Self Check Indication

When the system is either exiting service lockout or has just booted, the system will execute a Self
Check to verify a safe operation. A banner is displayed indicating the Self Check execution to the
user.
Figure 46. Operator Interface Self Check indicator

5.3.4.3. Communication Loss

When the Operator Interface can no longer communicate with the Battery Management System, a
communication lost banner is displayed at the top of the display. It will provide the amount of time
since disconnected and updates each second.
Figure 47. Operator Interface Communication lost indicator
Document ID: NE-DS-011 62 Rev 1.0, 2023-05-19
G5 Faraday