Table of Contents
Advertisement
2.3. G5 BMS Software
The Nuvation Energy G5 BMS Software is composed of two parts: the Operator Interface and the G5
BMS Firmware.
2.3.1. Operator Interface
The Operator Interface is a browser-based graphical view of the system state, data, and
configuration.
Key Features:
▪
Provides Unified View of Entire Battery - Access diagnostics and performance data of the
battery stack
▪
Statistics - Provides stack-level voltage, temperature & current statistics for all cells
▪
Real-Time - Streams measurements and control signals for real-time display and recording
▪
Faults and Warnings - Aggregated for system-wide overview, plus detail drill-down for battery
pack diagnostics
▪
SOC and SOH - Calculates State of Charge (SoC) and State of Health (SoH) for the battery stack
▪
Communications Status - Ensures that measurements, control signals, and other data are
propagating properly throughout the entire system for safe operation
▪
Flow-Through I/O - Provides a single entry point to all measurement and control points in the
BMS
2.3.2. G5 BMS Firmware
The G5 BMS Firmware is a highly configurable software that manages the stack operation and
controls. It enables the BMS to be used as a protection device against unsafe voltage, temperature,
Document ID: NE-DS-011
Nuvation Energy G5 High-Voltage BMS - NUVG5 Product Manual
Figure 6. Operator Interface Dashboard
8
Rev 1.0, 2023-05-19
G5 Faraday
Advertisement
Table of Contents
