Control Panel - Siemens HL9R4T05 U Series Instruction Manual

Getting to know your appliance
en
The control panel
Controls
Main switch
#
Selecting a hotplate
¸
Adjustment fields
A / @
PowerBoost function
&
Timer function
0
Childproof lock
‚
Indicators
Operating status
‹
Heat settings
‚ - Š
Residual heat
• / œ
Hotplates
Simple hotplate
$
Only use cookware that is suitable for induction cooking; see section ~ "Induction cooking"
Residual heat indicator
The hob has a residual heat indicator for each hotplate.
This indicates that a hotplate is still hot. Do not touch a
hotplate while the residual heat indicator is lit up.
The following indicators are shown depending on the
amount of residual heat:
Display : High temperature
•
■

Control panel

Details may vary depending on the appliance model.
Control knobs
The control knobs can be pushed in and remain
pressed down when they are in the "out" position. Press
down on the control knob again to release it back up.
Buttons and display
You can use the buttons to set various additional
functions on your appliance. You will be able to see the
values for these on the display.
14
Use cookware that is a suitable size
Indicators
PowerBoost function
›
Timer
‹‹
Touch controls
Touching a symbol activates the associated function.
Notes
Always keep the control panel clean and dry.
■
Moisture reduces its effectiveness.
Do not place any cookware near the indicators or
■
sensors. The electronics could overheat.
The hotplates
Display : Low temperature
œ
■
If you remove the cookware from the hotplate during
cooking, the residual heat indicator and the selected
heat setting will flash alternately.
When the hotplate is switched off, the residual heat
indicator will light up. Even after the hob has been
switched off, the residual heat indicator will stay lit for as
long as the hotplate is still warm.
Symbol
Time-setting options Tap the symbol repeatedly to select
v
Minus
A
Plus
@
Childproof lock
kg/ '
Weight
--------
Meaning
the timer Q , duration x , end
time y and time v .
Reduce setting values.
Increase setting values.
Lock and unlock the oven functions
on the control panel.
Select a weight for the programmes.