Time-Setting Options - Siemens HXN39AD21 User Manual And Installation Instructions

Free standing cooker
Table of Contents

Advertisement

Time-setting
Use
option
End
A time at which the operation ends
can be set for the cooking time. The
appliance starts up automatically so
that it finishes cooking at the re-
quired time.
Time
Set the time.
12.2 Setting the timer
The timer runs independently of the appliance when it
is in operation. The timer can be set up to 23 hours
and 59 minutes regardless of whether the appliance is
on or off. The timer has its own audible signal so that
you can tell whether it is the timer or a cooking time
which has elapsed.
Note: The timer and cooking time cannot count down
at the same time. If a cooking time has already been
set, you cannot set the timer.
Press
repeatedly until
1.
Use the
⁠ or
⁠   button to set the timer duration.
2.
Button
Recommended value
5 minutes
10 minutes
Up to 10 minutes, the timer duration can be set in
30-second increments. The time increments be-
come bigger as the value increases.
a The timer starts and the timer duration begins to
count down after a few seconds.
a An audible signal sounds and the timer duration is
zero in the display when the timer duration has
elapsed.
Once the timer duration has elapsed
3.
Press any button to switch off the timer.
Changing the timer
The timer duration can be changed at any time.
Requirement:  is highlighted in the display.
Use the
or
button to change the timer duration.
a The appliance applies the change after a few
seconds.
Cancelling the timer
The timer duration can be cancelled at any time.
Requirement:  is highlighted in the display.
Use the
button to reset the timer duration to zero.
a After a few seconds, the appliance applies the
change and
goes out.
12.3 Setting the cooking time
The cooking time can be set to up to 23 hours and 59
minutes for the operation.
Requirement: The type of heating and temperature or
setting have been set.
Press
repeatedly until
1.
play.
Use the
or
button to set the cooking time.
2.
is selected in the display.
is selected in the dis-
Additional
Recommended value
pro-
gramme
10 minutes
30 minutes
The cooking time can be set in one-minute incre-
ments up to one hour, and then in five-minute incre-
ments.
a After a few seconds, the appliance starts heating
and the cooking time counts down.
a When the cooking time has elapsed, a signal
sounds and the duration is at zero in the display.
When the cooking time has elapsed:
3.
Press any button to end the signal prematurely.
To set another cooking time, press the
When the dish is ready, switch off the appliance.
Changing the cooking time
The cooking time can be changed at any time.
is highlighted in the display.
Requirement: 
Change the cooking time using the
a The appliance applies the change after a few
seconds.
Cancelling the cooking time
The cooking time can be cancelled at any time.
is highlighted in the display.
Requirement: 
Reset the cooking time to zero using the
a After a few seconds, the appliance applies the
change and continues to heat without a cooking
time.
12.4 Setting the end time
You can delay the time at which the cooking time is
due to end by up to 23 hours and 59 minutes.
Notes
¡ The end time cannot be set for types of heating with
grill function.
¡ In order to achieve a good cooking result, do not
delay the end time once the appliance is already op-
erating.
¡ Food will spoil if you leave it in the cooking com-
partment for too long.
Requirements
¡ The type of heating and temperature or setting have
been set.
¡ A cooking time must be set.
Press
repeatedly until
1.
play.
Press the
⁠ or
⁠   button.
2.
a The display shows the calculated end time.
Use the
⁠ or
⁠   button to delay the end time.
3.
a After a few seconds, the appliance applies the set-
ting and the display shows the set end time.
a Once the calculated start time has been reached,
the appliance starts heating up and the cooking
time starts counting down.
a When the cooking time has elapsed, a signal
sounds and the duration is at zero in the display.
When the cooking time has elapsed:
4.
Press any button to end the signal prematurely.
Time-setting options en
⁠   button.
or
button.
button.
is selected in the dis-
19

Advertisement

Table of Contents
loading

Table of Contents