Control Panel - Siemens HU23351 M Series Instruction Manual

Control panel

Here you can see an overview of the control panel. The design
depends on the respective appliance model.
Explanations
1 Switch for the gas burner (function selector)
2 Timer
3 Multi-function button
4 Ignition button
5 Cooker switch
Function selector
If you turn the function selector anti-clockwise, the oven is
heated; if you turn it clockwise, the grill function is switched on.
Positions
Zero position
û
170-270 Temperature
range
Grill setting
#
Heat setting for the lower burner: 3 kW
Heat setting of the oven gas grill: 2,1 kW
Timer
Using the timer, you can set a time of up to 60 minutes. The
timer runs independently of the oven. It can be used like a
kitchen timer.
Setting
Zero position
û
End of the set cook-
S
ing time
Minute display
S - 60
Setting procedure
Set the timer for the desired cooking time.
The time has elapsed
When the time has elapsed, a signal sounds. The switch turns
to the OFF position • automatically.
Light button
This button switches on the oven light.
To switch it off, press the multi-function button again.
10
Function
Oven not hot.
Temperature range in ºC for
baking cakes in baking tins,
pizza on the baking sheet, bis-
cuits etc.
Setting for the grill burner for
grilling at maximum tempera-
ture.
Function
Setting off
Signal when the set time has
elapsed
Time display, in minutes.
Ignition button
This button activates the electronic ignition system.
When you press the button, all igniters ignite at the same time.
Burner knob
You can adjust the heat setting of the hotplates using the four
burner knobs.
Positions
Zero position
Ú
Settings area
•
–
There is a limit stop at the end of the settings area. Do not turn
the timer beyond this.
Function/gas oven
The oven is switched off.
Large flame = highest setting
Economy flame = lowest setting