Converting The Cable Management Arm For Opposite Side Mounting - HPE Apollo 4530 Gen9 Setup And Installation Manual

Converting the cable management arm for opposite side mounting

The cable management arm is designed for ambidextrous implementation. You can convert the arm for
right-hand swing.
IMPORTANT: When converting the cable arm, always be sure to orient the arm with the cable
trough facing upward.
NOTE: To access some components on the rear of the product, you may need to remove the cable
management arm.
Procedure
1. Press the latch to release the cable management arm and remove the cable management arm.
2. Move the cable management arm to the right rack rail and align the tab for opposite side mounting.
40 Cabling and powering up the chassis