Integration Instructions; General; List Of Applicable Rules; Specific Operational Use Conditions - Elatec TWN4 MULTITECH 2 M HF Integration Manual

Hide thumbs Also See for TWN4 MULTITECH 2 M HF:
Table of Contents

Advertisement

3 INTEGRATION INSTRUCTIONS

3.1

GENERAL

TWN4 MultiTech 2 M HF may be installed in any host devices, as long as it is operated under the operational conditions stated in the
user manual and other technical documents (e.g. data sheet). TWN4 MultiTech 2 M HF is equipped with one integrated antenna. Thus,
no antenna installation is required.
3.2

LIST OF APPLICABLE RULES

Refer to the approval certificates, grants and declarations of conformity issued for TWN4 MultiTech 2 M HF, and to the following rules
applicable to TWN4 MultiTech 2 M HF:
47 CFR 15.202
47 CFR 15.207
47 CFR 15.209
47 CFR 15.215
3.3

SPECIFIC OPERATIONAL USE CONDITIONS

There are no specific operational use conditions for TWN4 MultiTech 2 M HF other than the conditions mentioned in the user manual
and data sheet of TWN4 MultiTech 2 M HF. The host manufacturer or integrator must ensure that these use conditions comply with
the use conditions of the host device. In addition, these use conditions must be stated in the user manual of the host device.
3.4

LIMITED MODULE PROCEDURES

n/a
3.5

TRACE ANTENNA DESIGN

n/a
3.6

RF EXPOSURE CONSIDERATIONS

The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing
and authorization process as required.
Refer to Chapter "Compliance Statements" for detailed information about the radio frequency exposure conditions applicable to
TWN4 MultiTech 2 M HF.
These RF exposure conditions must be stated in the end-product manual(s) of the host product manufacturer.
3.7

ANTENNAS

TWN4 MultiTech 2 M HF is equipped with the following antenna:
HF antenna (13.56 MHz)
Dimensions: 42 x 44 mm / 1.65 x 1.73 inch
Number of turns: 3
For more information, refer to the related product data sheet or other relevant technical documents.
3.8

LABEL AND COMPLIANCE INFORMATION

Refer to Chapters "Compliance Statements" and "Integrator and Host Requirements" for detailed label and compliance information.
© 2023 ELATEC GmbH – TWN4 MultiTech 2 M HF integration manual – DocRev05 – EN – 07/2023
47 CFR 15.225
RSS-Gen
RSS-210
Page 5 of 13

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TWN4 MULTITECH 2 M HF and is the answer not in the manual?

Questions and answers

Table of Contents