Safety Information - Elatec TWN4 MULTITECH 2 M HF Integration Manual

2 SAFETY INFORMATION

•
The product is an electronic product whose installation requires specific skills and expertise.
The installation of the product should be done by a trained and qualified personnel only.
•
Before unpacking and installing the product, this integration manual and all relevant installation instructions must be read and
understood carefully.
•
Before installing the product into a host device, the integrator should also make sure that he/she has read and understood the
ELATEC technical documentation related to the product, as well as the technical documentation related to the host device. In
particular, the instructions and safety information given in the user manual of TWN4 MultiTech 2 M HF should be read carefully
and listed in the technical documentation of the host manufacturer as well, as soon as these instructions and safety information
are required for a safe and proper use of the host device containing TWN4 MultiTech 2 M HF
•
The product might show sharp edges or corners and requires a particular attention during the unpacking and installation.
Unpack the product carefully and do not touch any sharp edges or corners, or any sensitive components on the product.
If necessary, wear safety gloves.
•
ELATEC also recommends the integrators to follow general ESD protective measures during the installation of the product into
a host device, e.g. the use of an antistatic wristband or special gloves.
•
In case the product is equipped with a cable, do not twist or pull the cable.
•
In case the product is equipped with a cable, the cable may not be replaced or extended.
ELATEC excludes any liability for damages or injuries resulting from the use of the product with a cable extension or a replaced
cable.
•
The integrator should not touch the antennas (if not shielded), printed circuit boards, connectors or other sensitive components
on the product.
•
Metallic materials on or in direct vicinity to the product might reduce the reading performance of the product. Refer to the
installation instructions or contact ELATEC for more information.
Any failure to comply with the safety information given in this document and in the user manual, is considered improper
use. ELATEC excludes any liability in case of improper use or faulty product installation.
© 2023 ELATEC GmbH – TWN4 MultiTech 2 M HF integration manual – DocRev05 – EN – 07/2023
.
Page 4 of 13