Safety Information - Elatec TWN4 Mini reader Series User Manual

2 SAFETY INFORMATION

Transport and storage
•
Carefully observe the transport and storage conditions described on the product packaging or
other relevant product documents (e.g. data sheet).
Unpacking and installation
•
Before unpacking and installing the product, this manual and all relevant installation instructions
must be read carefully and understood.
•
The product might show sharp edges or corners and requires a particular attention during the
unpacking and installation.
Unpack the product carefully and do not touch any sharp edges or corners, or any sensitive
components on the product.
If necessary, wear safety gloves.
•
After unpacking the product, check that all components have been delivered according to your
order and delivery note.
Contact ELATEC if your order is not complete.
•
In case the product is equipped with a cable, do not twist or pull the cable excessively.
•
In case the product is equipped with a cable, the cable may not be replaced or extended.
ELATEC excludes any liability for damages or injuries resulting from the use of the product with a
cable extension or a replaced cable.
•
The product is an electronic device whose installation requires specific skills and expertise.
The installation of the product should be done by trained and qualified personnel only.
Handling
•
To comply with the applicable RF exposure requirements, the product should be installed and
operated with a minimum distance of 20 cm to any user's/nearby person's body at all times. Refer
to Chapter "Compliance statements" for further information about RF exposure compliance.
•
Depending on your product configuration, the product might be equipped with one or more light-
emitting diodes (LED).
Avoid direct eye contact with the blinking or steady light of the light-emitting diodes.
•
The product has been designed for use under specific conditions, e.g. in a specific temperature
range (refer to the product data sheet).
Any use of the product under different conditions might damage the product or alter its reading
performance.
•
The use of other RFID devices in direct vicinity to the product, or in combination with the product
might damage the product or alter its reading performance. In case of doubts, contact ELATEC for
more information.
•
The user is liable for the use of spare parts or accessories other than the ones sold or
recommended by ELATEC.
ELATEC excludes any liability for damages or injuries resulting from the use of spare parts or
accessories other than the ones sold or recommended by ELATEC.
© 2024 – ELATEC GmbH – TWN4 Mini reader family – user manual – DocRev01 – EN – 05/2024 Page 4 of 15