1 SAFETY INFORMATION
1.1 SAFETY WARNINGS
NOTE!
Only use the Bluetooth communication
module (CFW100-CBLT) on WEG CFW100
series inverters with firmware from version
V2.0X up (see P023).
It is recommended to read the CFW100
User Manual before installing or operating
this accessory.
This guide contains important information
regarding the proper understanding and
correct operation of this module.
1.2 PRELIMINARY RECOMMENDATIONS
ATTENTION!
Always disconnect the general power
supply before connecting or disconnecting
the accessories of the CFW100 frequency
inverter.
Wait for at least ten minutes for the full
discharge of the inverter.
2 GENERAL INFORMATION
This guide provides directions for the installation,
c o n f i g u r a t i o n a n d o p e r a ti o n of t h e B l u e to ot h
communication module (CFW100-CBLT).
3 PACKAGE CONTENT
Upon receiving the product, check if the package
contains:
Accessory in anti-static package.
Installation, configuration and operation guide.
4 ACCESSORY INSTALLATION
The CFW100-CBLT is easily connected to the CFW100
frequency inverter by means of the plug-and-play concept.
Bluetooth Communication Module
CFW100 | 5