Table of Contents
Advertisement
76
WLAN Client
Security Wiz-
Value
ard Data
Security Set-
Selection (also possible more than
tings for Man-
once):
agement
Command Line Interface (CLI / Tel-
Interface
net protocol - yes/no
WEB Based Management /HTML
protocol - yes/no
Simple Management Network Proto-
col (SMNP) - yes/no
Blocking Admin-
Allow management only from wired
istration via the
interface - yes/no
Wireless Net-
work
Security level
Select from:
None (Open System)
Low (Shared key)
Medium (WPA2-PSK)
High (WPA2 RADIUS)
Low Security
Level
Default key
Select from: Key 1- Key 4
Length
Select from: 40, 104 or 128 Bit
Key
___________________________
Security level
Medium
Pass Phrase
___________________________
ARCADIS
DRAFT 22.04.2008
SP00-000.814.09.01.02
11.07
WLAN Client Configuration List
Comments
With selection, the protocol interface to the
administration of the WLAN Client is defined.
At least one protocol interface must be
selected.
Recommendation: Select at least WEB
Based Management /HTML protocol.
With selection, the WLAN Client can be
administered only via the Ethernet connec-
tion.
Select the appropriate security level.
The None and Low security levels are NOT
recommended!
Note: Other combinations comprised of
authentification, code type and code origin
can be configured manually in the Security
menus of the WLAN Client WEB server.
Select Key 1. A max. of 4 keys can be saved.
40 Bit: 5 ASCII characters or 10 hexadecimal
figures (0-F).
104 Bit: 13 ASCII characters or 26 hexadeci-
mal figures (0-F).
128 Bit: 16 ASCII characters or 32 hexadeci-
mal figures (0-F).
Depending on the "Length" selection, enter
the appropriate key in the listed length.
Enter the WPA2 key.
Length: 8 to 63 characters or exactly 64
hexadecimal figures.
Page 76 of 78
CS PS SP
Siemens
Medical Solutions
Advertisement
Table of Contents
