Table of Contents
Advertisement
58
•
Open the "Antenna Type" list box and select "ANT795-4MR (Std. antenna) [3dBi].
•
Click on the <Next>>> button.
Fig. 55: WLAN Client, "Finished" HTTPS page
•
Click on the <Finish> button to transfer the data to the WLAN Client.
•
Wait until the transfer and save are completed (several minutes).
ARCADIS
NOTE
If the "Outdoor Client mode" is not activated (= Indoor Client
mode) , all country-specific allowed channels and sender
services available in the building are available for operation.
In the Outdoor Client mode, selection of the country-spe-
cific, available channels and sender services are restricted
for operation out of doors.
In the "Antennal gain (in dBi) text box, "3" is entered automatically.
In the "Antennal cable length (in meters) text box, "0" is entered automatically.
The SIMATIC NET "Finished" window is displayed.
The progress of the transfer is displayed in the status display for the window.
The basic programming is completed.
The Security programming still must be performed.
DRAFT 22.04.2008
SP00-000.814.09.01.02
11.07
WLAN Configuration
Page 58 of 78
CS PS SP
Siemens
Medical Solutions
Advertisement
Table of Contents
