Table of Contents
Advertisement
Chapter 5. Installing and configuring a cluster on ThinkAgile
HX Series servers
To configure a cluster on the ThinkAgile HX Series server, you can use the Nutanix Foundation tool. The
Foundation tool is a virtual machine that you can install in your network.
Prerequisites
Before using the Foundation tool make sure that you have met the following conditions:
• All ThinkAgile HX Series servers must be connected to the broadcast domain of the host where the
Foundation tool is running.
Note: This includes both the Lenovo XClarity Controller connections, as well as the data connections
(10Gb, 25Gb, etc.)
• All ThinkAgile HX Series servers must be powered on.
• All ThinkAgile HX Series servers are flashed to the current best recipe levels
The ThinkAgile HX Series Best Recipe is available at the following location:
https://support.lenovo.com/us/en/solutions/ht505413
Downloading and running Foundation
Instructions for downloading and running Foundation are available in the Nutanix Field Installation Guide.
https://portal.nutanix.com/#/page/docs/details?targetId=Field-Installation-Guide-v4-0:Field-Installation-Guide-v4-
0
© Copyright Lenovo , 2018
35
Advertisement
Table of Contents
