Before adjusting the retainer on the M.2 backplane, locate the correct keyhole that the retainer should be
installed into to accommodate the particular size of the M.2 drive you wish to install.
To adjust the retainer on the M.2 backplane, complete the following steps:
Figure 53. M.2 retainer adjustment
Step 1.
Press both sides of the retainer
Step 2.
Move the retainer forward until it is in the large opening of the keyhole.
Step 3.
Take the retainer out of the keyhole.
Step 4.
Insert the retainer into the correct keyhole.
Step 5.
Press both sides of the retainer.
Step 6.
Slide the retainer backwards until it is seated in place.
78
User Guide for ThinkAgile HX Enclosure Node ThinkAgile HX3721 Node
1
.